--- title: "Sensor failover issues" slug: "sensor-failover-issues-2" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:28:23Z published: 2026-11-19T12:28:23Z canonical: "docs.trellix.com/sensor-failover-issues-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Sensor failover issues Checking the following connections and settings might resolve Sensor failover issues: - The Sensor model and Sensor image version on both the peer Sensors should be the same. - The Sensor license and IPv6 status should be identical on the peer Sensors. - Identify the interconnect port for the selected model because the interconnect ports vary for different models. - Check on the FO type setting on the Sensor. The failover creation would fail if the FO type is set on the primary Sensor. - The Sensor health status should be good and normal.