These are the informational faults for a Sensor device. These messages are only for your information and there is no specific action to be taken.
| Fault | Severity | Description/Cause |
|---|---|---|
| Device Startup Detected | Informational | The device has powered up or rebooted. |
| FIPS Violation Detected - User Login | Informational | The device reports a user login to its CLI after device initialization. This is a FIPS 140-2 Level 3 violation. |
| Device Reset for FIPS Mode Change | Informational | {0} |
| Cluster Software Initialization Status | Informational | {0} device software has been initialized correctly. |
| Pluggable Interface Absent {0} | Informational | Pluggable interface in {0} is {1}. |
| Device Download Started | Informational | A download has been initiated from the device CLI. |
| FIPS Mode Change | Informational | An upgrade or downgrade between FIPS and non-FIPS software images has been detected. This resets the device configuration and restores the default login password. |
| Logging Error | Informational | When you clear SEL manually using selview or some other IPMI-aware utility, or it is done in the factory as one of the last steps in the manufacturing process. |
| Load Balancer Power Up | Informational | Load Balancer "{0}" has completed booting and is online. |
| Packet Capture File Transfer Status | Informational | The device has started sending the packet capture file via SCP. |
| Hitless Reboot Status | Informational | The device successfully completed a hitless reboot.
The device successfully completed auto-recovery. |
| Device Download Complete | Informational | Device download initiated from the device CLI has completed with status {2}. Download type={4}, Time={3}, Filename={5} |
| Sensor Health Changed | Informational | Health of sensor {0} changed from {1} to {2}
This fault is raised in the event of Sensor's Overall Health status change. |