--- title: "Sensor informational faults" slug: "sensor-informational-faults" tags: ["Product Usage", "IPS 10.1.10"] updated: 2026-10-05T15:39:58Z published: 2026-10-05T15:39:58Z canonical: "docs.trellix.com/sensor-informational-faults" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Sensor informational faults These are the informational faults for a Sensor device. These messages are only for your information and there is no specific action to be taken. | Fault | Severity | Description/Cause | | --- | --- | --- | | Device Startup Detected | Informational | The device has powered up or rebooted. | | FIPS Violation Detected - User Login | Informational | The device reports a user login to its CLI after device initialization. This is a FIPS 140-2 Level 3 violation. | | Device Reset for FIPS Mode Change | Informational | {0} | | Cluster Software Initialization Status | Informational | {0} device software has been initialized correctly. | | Pluggable Interface Absent {0} | Informational | Pluggable interface in {0} is {1}. | | Device Download Started | Informational | A download has been initiated from the device CLI. | | FIPS Mode Change | Informational | An upgrade or downgrade between FIPS and non-FIPS software images has been detected. This resets the device configuration and restores the default login password. | | Logging Error | Informational | When you clear SEL manually using selview or some other IPMI-aware utility, or it is done in the factory as one of the last steps in the manufacturing process. | | Load Balancer Power Up | Informational | Load Balancer "{0}" has completed booting and is online. | | Packet Capture File Transfer Status | Informational | The device has started sending the packet capture file via SCP. | | Hitless Reboot Status | Informational | The device successfully completed a hitless reboot. The device successfully completed auto-recovery. | | Device Download Complete | Informational | Device download initiated from the device CLI has completed with status {2}. Download type={4}, Time={3}, Filename={5} | | Sensor Health Changed | Informational | Health of sensor {0} changed from {1} to {2} This fault is raised in the event of Sensor's **Overall Health** status change. |