The front panel LEDs provide status information for the health of the Sensor, link, speed, and activity on its management/response/monitoring ports.
Front panel LEDs
LED | Status | Description |
|---|---|---|
Power | Solid Green Off | The system is ON. The system is OFF. |
HDD | Green | The LED lights will blink when there is data transmission in the SATA port and M.2 Key M (NVMe). |
Management/Response Port (Speed) | Speed LED - Amber Speed LED - Off | The port speed is 1000 Mbps. The port speed is 100/10 Mbps. |
Management/Response Port (Link) | Link LED - Solid Green Link LED - Blinking Green Link LED - Off | The link is up with no traffic. The link is up with traffic. The link is down. |
4-port RJ-45 1 Gbps/100 Mbps/10 Mbps with built-in internal fail-open (ports 1-4, 7-10) | Link LED - Solid Green | The link is up with no traffic. |
Link LED - Blinking Green | The link is up with traffic. | |
Link LED - Off | The link is down. | |
Speed LED - Amber | The link is up with a 1000 Mbps port speed. | |
Speed LED - Off | The link is up with a 100/10 Mbps port speed. | |
Normal/Bypass LED - Green | The port pair is in the Bypass mode. | |
Normal/Bypass LED - Red | The port pair is in Inline Fail-Close/SPAN/Tap/Inline Fail-Active mode while the system is in a reboot phase and before it is back to a good health state, or when the system is shutdown. | |
Normal/Bypass LED - Off | The port pair is in Inline Fail-Open/Inline Fail-Active/Inline Fail-Close/SPAN/Tap mode. | |
4-port RJ-45 1 Gbps/100 Mbps/10 Mbps with internal fail-open (ports 11-14) | Link LED - Solid Green | The link is up with no traffic. |
Link LED - Blinking Green | The link is up with traffic. | |
Link LED - Off | The link is down. | |
Speed LED - Amber | The link is up with a 1000 Mbps port speed. | |
Speed LED - Off | The link is up with a 100/10 Mbps port speed. | |
Normal/Bypass LED - Green | The port pair is in the Bypass mode. | |
Normal/Bypass LED - Red | The port pair is in Inline Fail-Close/SPAN/Tap/Inline Fail-Active mode while the system is in a reboot phase and before it is back to a good health state, or when the system is shutdown. | |
Normal/Bypass LED - Off | The port pair is in Inline Fail-Open/Inline Fail-Active/Inline Fail-Close/SPAN/Tap mode. | |
4-port 10/1 GigE MM 50/62.5 µm with internal fail-open (ports 11-14) | Link LED - Solid Green | The link is up with no traffic. |
Link LED - Blinking Green | The link is up with traffic. | |
Link LED - Off | The link is down. | |
Speed LED - Amber | The link is up with a 10 Gbps port speed. | |
Speed LED - Off | The link is up with a 1 Gbps port speed. | |
Normal/Bypass LED - Green | The port pair is in the Bypass mode. | |
Normal/Bypass LED - Red | The port pair is in Inline Fail-Close/SPAN/Tap/Inline Fail-Active mode while the system is in a reboot phase and before it is back to a good health state, or when the system is shutdown. | |
Normal/Bypass LED - Off | The port pair is in Inline Fail-Open/Inline Fail-Active/Inline Fail-Close/SPAN/Tap mode. | |
2-port SFP/SFP+ with built-in module (ports 5-6) | Link LED - Solid Green | The link is up with traffic. |
Link LED - Blinking Green | The link is up with traffic. | |
Link LED - Off | The link is down. | |
Speed LED - Amber | The link is up with a 10 Gbps port speed. | |
Speed LED - Off | The link is up with a 1 Gbps port speed. |
Rear panel LEDs
LED | Status | Description |
|---|---|---|
Power supply | Blinking Red | One power feed is being used in a slot, and the system is in good condition. |
Solid Red | One power feed is used for each slot, and the system is on standby. | |
Blinking Green | Two power feeds are being used, and the system is on standby | |
Solid Green | Two power feeds are used, and the system is in good condition. |