--- title: "Sensor LEDs" slug: "sensor-leds-5" tags: ["Hardware", "IPS 11.1.x"] updated: 2026-09-17T09:43:45Z published: 2026-09-17T09:43:45Z canonical: "docs.trellix.com/sensor-leds-5" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Sensor LEDs The front panel LEDs provide status information for the health of the Sensor and the activity on its ports. ### Front panel LEDs | LED | Status | Description | | --- | --- | --- | | Temp | Green Amber | Inlet air temperature measured inside the chassis is normal. (Chassis temperature OK) Inlet air temperature measured inside the chassis is too high. (Chassis temperature too hot) | | Fan | Green Amber | All the fans are operating. One or more fans are not working. | | Status | Green Amber | It indicates that Sensor is in good health. System is booting up or something is not in good health status. | | Management Port Speed | Green Amber Off | The port speed is 1000 Mbps. The port speed is 100 Mbps. The port speed is 10 Mbps. | | Management Port Link | Green Off | The link is up. The link is down. | | Response Port Speed | Green Amber Off | The port speed is 1000 Mbps. The port speed is 100 Mbps. The port speed is 10 Mbps. | | Response Port Link | Green Off | The link is up. The link is down. | | Normal/Bypass | Green Off | The port pair is in Inline Fail-Open/Inline Fail-Close/SPAN/Tap Mode. The Port Pair is in the Bypass Mode. | | Ethernet Ports Link | Green Off | The link is up. The link is down. | | Ethernet Ports Speed | Green Amber Off | The port speed is 1000 Mbps. The port speed is 100 Mbps. The port speed is 10 Mbps. | > [!NOTE] > Note > > There are no rear panel LEDs on the NS3x00 Sensors.