This section details the requirements to upgrade the Sensor software to 11.1. In this section, the term Sensor refers to NS-series and Virtual IPS Sensors unless otherwise specified.
Prerequisites for NS-series Sensor software upgrade
Upgrade paths for NS-series Sensor software versions
Tip
For all upgrades related to FIPS or CC Certification, see Upgrade Paths in Trellix Intrusion Prevention System 11.1.x FIPS and CC Certification Guide.
Sensor models | Version | Upgrade path to 11.1 |
|---|---|---|
NS9600 (Standalone and stack) | 11.1.5.113, 11.1.5.114, 11.1.5.139, 11.1.5.151 | 11.1.5.167 |
NS9500 (Standalone) | 10.1.5.3, 10.1.5.5, 10.1.5.41, 10.1.5.64, 10.1.5.75, 10.1.5.92, 10.1.5.107, 10.1.5.116, 10.1.5.153, 10.1.5.170, 10.1.5.190, 10.1.5.204 | 11.1.5.167 |
11.1.5.2, 11.1.5.22, 11.1.5.44, 11.1.5.57, 11.1.5.72, 11.1.5.84, 11.1.5.98, 11.1.5.113, 11.1.5.114, 11.1.5.122, 11.1.5.139, 11.1.5.151 | 11.1.5.167 | |
NS9500 (Stack) | 10.1.5.3, 10.1.5.5, 10.1.5.41, 10.1.5.64, 10.1.5.75, 10.1.5.92, 10.1.5.107, 10.1.5.116, 10.1.5.153, 10.1.5.170, 10.1.5.190, 10.1.5.204 | 11.1.5.167 |
11.1.5.2, 11.1.5.22, 11.1.5.44, 11.1.5.57, 11.1.5.72, 11.1.5.84, 11.1.5.98, 11.1.5.113, 11.1.5.114, 11.1.5.122, 11.1.5.139, 11.1.5.151 | 11.1.5.167 | |
NS-series (NS9300, NS9200, NS9100, NS7300, NS7200, NS7100, NS5200, NS5100, NS3200, NS3100) | 10.1.5.3, 10.1.5.5, 10.1.5.41, 10.1.5.64, 10.1.5.75, 10.1.5.92, 10.1.5.106, 10.1.5.116, 10.1.5.153, 10.1.5.170, 10.1.5.190, 10.1.5.202 | 11.1.5.167 |
11.1.5.2, 11.1.5.22, 11.1.5.44, 11.1.5.56, 11.1.5.72, 11.1.5.84, 11.1.5.98, 11.1.5.113, 11.1.5.114, 11.1.5.122, 11.1.5.136, 11.1.5.151 | 11.1.5.167 | |
NS7600 | 11.1.5.84, 11.1.5.99, 11.1.5.113, 11.1.5.114, 11.1.5.122, 11.1.5.139, 11.1.5.151 | 11.1.5.167 |
NS7500 | 10.1.5.64, 10.1.5.75, 10.1.5.92, 10.1.5.106, 10.1.5.116, 10.1.5.153, 10.1.5.170, 10.1.5.190, 10.1.5.202 | 11.1.5.167 |
11.1.5.2, 11.1.5.22, 11.1.5.44, 11.1.5.56, 11.1.5.72, 11.1.5.84, 11.1.5.98, 11.1.5.113, 11.1.5.114, 11.1.5.122, 11.1.5.139, 11.1.5.151 | 11.1.5.167 | |
NS7x50 | 10.1.5.3, 10.1.5.5, 10.1.5.41, 10.1.5.64, 10.1.5.75, 10.1.5.92, 10.1.5.107, 10.1.5.116, 10.1.5.153, 10.1.5.170, 10.1.5.190, 10.1.5.204 | 11.1.5.167 |
11.1.5.2, 11.1.5.22, 11.1.5.44, 11.1.5.57, 11.1.5.72, 11.1.5.84, 11.1.5.98, 11.1.5.113, 11.1.5.114, 11.1.5.122, 11.1.5.136, 11.1.5.151 | 11.1.5.167 | |
NS3600 | 11.1.5.84, 11.1.5.98, 11.1.5.113, 11.1.5.114, 11.1.5.122, 11.1.5.139, 11.1.5.151 | 11.1.5.167 |
NS3500 | 10.1.5.3, 10.1.5.5, 10.1.5.41, 10.1.5.64, 10.1.5.75, 10.1.5.92, 10.1.5.106, 10.1.5.116, 10.1.5.153, 10.1.5.170, 10.1.5.190, 10.1.5.202 | 11.1.5.167 |
11.1.5.2, 11.1.5.22, 11.1.5.44, 11.1.5.56, 11.1.5.72, 11.1.5.84, 11.1.5.98, 11.1.5.113, 11.1.5.114, 11.1.5.122, 11.1.5.136, 11.1.5.151 | 11.1.5.167 |
Important
If you are using a hotfix release, contact Trellix Support for the recommended upgrade path.
Important
When you perform a Sensor upgrade and reboot the Sensor, you need to verify the status of the Sensor through CLI and confirm if it displays SIGFILE or NO_SIGFILE. If the Sensor displays NO_SIGFILE, it is in an abnormal state. You can recover the Sensor immediately by manually deploying the sigfile to the Sensor using Manager.
Prerequisites for Virtual IPS Sensor software upgrade
Upgrade paths for Virtual IPS Sensor software versions
Sensor models | Version | Upgrade path to 11.1 |
|---|---|---|
IPS-VM600 | 10.1.7.1, 10.1.7.42, 10.1.7.51, 10.1.7.65, 10.1.7.86, 10.1.7.96, 10.1.7.123, 10.1.7.135, 10.1.7.155, 10.1.7.156 (Cloud) | 11.1.7.167 |
11.1.7.1, 11.1.7.22, 11.1.7.44, 11.1.7.56, 11.1.5.72, 11.1.7.81, 11.1.7.98, 11.1.7.111, 11.1.7.121, 11.1.7.136, 11.1.7.152 | 11.1.7.167 | |
IPS-VM5000 | 11.1.7.44, 11.1.7.56, 11.1.5.72, 11.1.7.81, 11.1.7.98, 11.1.7.111, 11.1.7.121, 11.1.7.136, 11.1.7.152 | 11.1.7.167 |
IPS-VM600-VSS-SSL, IPS-VM600-SSL, and IPS-VM5000-SSL | 11.1.7.121, 11.1.7.136, 11.1.7.152 | 11.1.7.167 |
Important
Starting with the 11.1 Update 2 release, the minimum memory requirement for IPS-VM600 deployment on ESXi and KVM is 8 GB. Contact Trellix support for more information and assistance.