The new docs.trellix.com features a modernized UI and AI-powered conversational search. Content is currently available in English, with additional languages expected in November 2026. We hope you enjoy the updated experience.

Sensor software upgrade requirements

Prev Next

This section details the requirements to upgrade the Sensor software to 11.1. In this section, the term Sensor refers to NS-series and Virtual IPS Sensors unless otherwise specified.

Prerequisites for NS-series Sensor software upgrade

Upgrade paths for NS-series Sensor software versions

Tip

For all upgrades related to FIPS or CC Certification, see Upgrade Paths in Trellix Intrusion Prevention System 11.1.x FIPS and CC Certification Guide.

Sensor models

Version

Upgrade path to 11.1

NS9600 (Standalone and stack)

11.1.5.113, 11.1.5.114, 11.1.5.139, 11.1.5.151, 11.1.5.167

11.1.5.185

NS9500 (Standalone)

10.1.5.3, 10.1.5.5, 10.1.5.41, 10.1.5.64, 10.1.5.75, 10.1.5.92, 10.1.5.107, 10.1.5.116, 10.1.5.153, 10.1.5.170, 10.1.5.190, 10.1.5.204

11.1.5.185

11.1.5.2, 11.1.5.22, 11.1.5.44, 11.1.5.57, 11.1.5.72, 11.1.5.84, 11.1.5.98, 11.1.5.113, 11.1.5.114, 11.1.5.122, 11.1.5.139, 11.1.5.151, 11.1.5.167

11.1.5.185

NS9500 (Stack)

10.1.5.3, 10.1.5.5, 10.1.5.41, 10.1.5.64, 10.1.5.75, 10.1.5.92, 10.1.5.107, 10.1.5.116, 10.1.5.153, 10.1.5.170, 10.1.5.190, 10.1.5.204

11.1.5.185

11.1.5.2, 11.1.5.22, 11.1.5.44, 11.1.5.57, 11.1.5.72, 11.1.5.84, 11.1.5.98, 11.1.5.113, 11.1.5.114, 11.1.5.122, 11.1.5.139, 11.1.5.151, 11.1.5.167

11.1.5.185

NS-series (NS9300, NS9200, NS9100, NS7300, NS7200, NS7100, NS5200, NS5100, NS3200, NS3100)

10.1.5.3, 10.1.5.5, 10.1.5.41, 10.1.5.64, 10.1.5.75, 10.1.5.92, 10.1.5.106, 10.1.5.116, 10.1.5.153, 10.1.5.170, 10.1.5.190, 10.1.5.202

11.1.5.185

11.1.5.2, 11.1.5.22, 11.1.5.44, 11.1.5.56, 11.1.5.72, 11.1.5.84, 11.1.5.98, 11.1.5.113, 11.1.5.114, 11.1.5.122, 11.1.5.136, 11.1.5.151, 11.1.5.167

11.1.5.185

NS7600

11.1.5.84, 11.1.5.99, 11.1.5.113, 11.1.5.114, 11.1.5.122, 11.1.5.139, 11.1.5.151, 11.1.5.167

11.1.5.185

NS7500

10.1.5.64, 10.1.5.75, 10.1.5.92, 10.1.5.106, 10.1.5.116, 10.1.5.153, 10.1.5.170, 10.1.5.190, 10.1.5.202

11.1.5.185

11.1.5.2, 11.1.5.22, 11.1.5.44, 11.1.5.56, 11.1.5.72, 11.1.5.84, 11.1.5.98, 11.1.5.113, 11.1.5.114, 11.1.5.122, 11.1.5.139, 11.1.5.151, 11.1.5.167

11.1.5.185

NS7x50

10.1.5.3, 10.1.5.5, 10.1.5.41, 10.1.5.64, 10.1.5.75, 10.1.5.92, 10.1.5.107, 10.1.5.116, 10.1.5.153, 10.1.5.170, 10.1.5.190, 10.1.5.204

11.1.5.185

11.1.5.2, 11.1.5.22, 11.1.5.44, 11.1.5.57, 11.1.5.72, 11.1.5.84, 11.1.5.98, 11.1.5.113, 11.1.5.114, 11.1.5.122, 11.1.5.136, 11.1.5.151, 11.1.5.167

11.1.5.185

NS3600

11.1.5.84, 11.1.5.98, 11.1.5.113, 11.1.5.114, 11.1.5.122, 11.1.5.139, 11.1.5.151, 11.1.5.167

11.1.5.185

NS3500

10.1.5.3, 10.1.5.5, 10.1.5.41, 10.1.5.64, 10.1.5.75, 10.1.5.92, 10.1.5.106, 10.1.5.116, 10.1.5.153, 10.1.5.170, 10.1.5.190, 10.1.5.202

11.1.5.185

11.1.5.2, 11.1.5.22, 11.1.5.44, 11.1.5.56, 11.1.5.72, 11.1.5.84, 11.1.5.98, 11.1.5.113, 11.1.5.114, 11.1.5.122, 11.1.5.136, 11.1.5.151, 11.1.5.167

11.1.5.185

Important

If you are using a hotfix release, contact Trellix Support for the recommended upgrade path.

Important

When you perform a Sensor upgrade and reboot the Sensor, you need to verify the status of the Sensor through CLI and confirm if it displays SIGFILE or NO_SIGFILE. If the Sensor displays NO_SIGFILE, it is in an abnormal state. You can recover the Sensor immediately by manually deploying the sigfile to the Sensor using Manager.

Prerequisites for Virtual IPS Sensor software upgrade

Upgrade paths for Virtual IPS Sensor software versions

Sensor models

Version

Upgrade path to 11.1

IPS-VM600

10.1.7.1, 10.1.7.42, 10.1.7.51, 10.1.7.65, 10.1.7.86, 10.1.7.96, 10.1.7.123, 10.1.7.135, 10.1.7.155, 10.1.7.156 (Cloud)

11.1.7.186

11.1.7.1, 11.1.7.22, 11.1.7.44, 11.1.7.56, 11.1.5.72, 11.1.7.81, 11.1.7.98, 11.1.7.111, 11.1.7.121, 11.1.7.136, 11.1.7.152, 11.1.7.167

11.1.7.186

IPS-VM5000

11.1.7.44, 11.1.7.56, 11.1.5.72, 11.1.7.81, 11.1.7.98, 11.1.7.111, 11.1.7.121, 11.1.7.136, 11.1.7.152, 11.1.7.167

11.1.7.186

IPS-VM600-VSS-SSL, IPS-VM600-SSL, and IPS-VM5000-SSL

11.1.7.121, 11.1.7.136, 11.1.7.152, 11.1.7.167

11.1.7.186

Important

Starting with the 11.1 Update 2 release, the minimum memory requirement for IPS-VM600 deployment on ESXi and KVM is 8 GB. Contact Trellix support for more information and assistance.