--- title: "Sensor software upgrade requirements" slug: "sensor-software-upgrade-requirements-2" tags: ["Install and Get Started", "IPS 11.1.x"] updated: 2026-11-19T12:28:11Z published: 2026-11-19T12:28:11Z canonical: "docs.trellix.com/sensor-software-upgrade-requirements-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Sensor software upgrade requirements This section details the requirements to upgrade the Sensor software to 11.1. In this section, the term *Sensor* refers to NS-series and Virtual IPS Sensors unless otherwise specified. **Prerequisites for NS-series Sensor software upgrade** **Upgrade paths for NS-series Sensor software versions** > [!TIP] > Tip > > For all upgrades related to FIPS or CC Certification, see [Upgrade Paths](/network-and-platform/docs/upgrade-paths-1) in [Trellix Intrusion Prevention System 11.1.x FIPS and CC Certification Guide](/network-and-platform/docs/trellix-intrusion-prevention-system-11-1-x-fips-and-cc-certification-guide). | Sensor models | Version | Upgrade path to 11.1 | | --- | --- | --- | | NS9600 (Standalone and stack) | 11.1.5.113, 11.1.5.114, 11.1.5.139, 11.1.5.151, 11.1.5.167 | 11.1.5.185 | | NS9500 (Standalone) | 10.1.5.3, 10.1.5.5, 10.1.5.41, 10.1.5.64, 10.1.5.75, 10.1.5.92, 10.1.5.107, 10.1.5.116, 10.1.5.153, 10.1.5.170, 10.1.5.190, 10.1.5.204 | 11.1.5.185 | | 11.1.5.2, 11.1.5.22, 11.1.5.44, 11.1.5.57, 11.1.5.72, 11.1.5.84, 11.1.5.98, 11.1.5.113, 11.1.5.114, 11.1.5.122, 11.1.5.139, 11.1.5.151, 11.1.5.167 | 11.1.5.185 | | NS9500 (Stack) | 10.1.5.3, 10.1.5.5, 10.1.5.41, 10.1.5.64, 10.1.5.75, 10.1.5.92, 10.1.5.107, 10.1.5.116, 10.1.5.153, 10.1.5.170, 10.1.5.190, 10.1.5.204 | 11.1.5.185 | | 11.1.5.2, 11.1.5.22, 11.1.5.44, 11.1.5.57, 11.1.5.72, 11.1.5.84, 11.1.5.98, 11.1.5.113, 11.1.5.114, 11.1.5.122, 11.1.5.139, 11.1.5.151, 11.1.5.167 | 11.1.5.185 | | NS-series (NS9300, NS9200, NS9100, NS7300, NS7200, NS7100, NS5200, NS5100, NS3200, NS3100) | 10.1.5.3, 10.1.5.5, 10.1.5.41, 10.1.5.64, 10.1.5.75, 10.1.5.92, 10.1.5.106, 10.1.5.116, 10.1.5.153, 10.1.5.170, 10.1.5.190, 10.1.5.202 | 11.1.5.185 | | 11.1.5.2, 11.1.5.22, 11.1.5.44, 11.1.5.56, 11.1.5.72, 11.1.5.84, 11.1.5.98, 11.1.5.113, 11.1.5.114, 11.1.5.122, 11.1.5.136, 11.1.5.151, 11.1.5.167 | 11.1.5.185 | | NS7600 | 11.1.5.84, 11.1.5.99, 11.1.5.113, 11.1.5.114, 11.1.5.122, 11.1.5.139, 11.1.5.151, 11.1.5.167 | 11.1.5.185 | | NS7500 | 10.1.5.64, 10.1.5.75, 10.1.5.92, 10.1.5.106, 10.1.5.116, 10.1.5.153, 10.1.5.170, 10.1.5.190, 10.1.5.202 | 11.1.5.185 | | 11.1.5.2, 11.1.5.22, 11.1.5.44, 11.1.5.56, 11.1.5.72, 11.1.5.84, 11.1.5.98, 11.1.5.113, 11.1.5.114, 11.1.5.122, 11.1.5.139, 11.1.5.151, 11.1.5.167 | 11.1.5.185 | | NS7x50 | 10.1.5.3, 10.1.5.5, 10.1.5.41, 10.1.5.64, 10.1.5.75, 10.1.5.92, 10.1.5.107, 10.1.5.116, 10.1.5.153, 10.1.5.170, 10.1.5.190, 10.1.5.204 | 11.1.5.185 | | 11.1.5.2, 11.1.5.22, 11.1.5.44, 11.1.5.57, 11.1.5.72, 11.1.5.84, 11.1.5.98, 11.1.5.113, 11.1.5.114, 11.1.5.122, 11.1.5.136, 11.1.5.151, 11.1.5.167 | 11.1.5.185 | | NS3600 | 11.1.5.84, 11.1.5.98, 11.1.5.113, 11.1.5.114, 11.1.5.122, 11.1.5.139, 11.1.5.151, 11.1.5.167 | 11.1.5.185 | | NS3500 | 10.1.5.3, 10.1.5.5, 10.1.5.41, 10.1.5.64, 10.1.5.75, 10.1.5.92, 10.1.5.106, 10.1.5.116, 10.1.5.153, 10.1.5.170, 10.1.5.190, 10.1.5.202 | 11.1.5.185 | | 11.1.5.2, 11.1.5.22, 11.1.5.44, 11.1.5.56, 11.1.5.72, 11.1.5.84, 11.1.5.98, 11.1.5.113, 11.1.5.114, 11.1.5.122, 11.1.5.136, 11.1.5.151, 11.1.5.167 | 11.1.5.185 | > [!WARNING] > Important > > If you are using a hotfix release, contact Trellix Support for the recommended upgrade path. > [!WARNING] > Important > > When you perform a Sensor upgrade and reboot the Sensor, you need to verify the status of the Sensor through CLI and confirm if it displays **SIGFILE** or **NO_SIGFILE**. If the Sensor displays **NO_SIGFILE**, it is in an abnormal state. You can recover the Sensor immediately by manually deploying the sigfile to the Sensor using Manager. **Prerequisites for Virtual IPS Sensor software upgrade** **Upgrade paths for Virtual IPS Sensor software versions** | Sensor models | Version | Upgrade path to 11.1 | | --- | --- | --- | | IPS-VM600 | 10.1.7.1, 10.1.7.42, 10.1.7.51, 10.1.7.65, 10.1.7.86, 10.1.7.96, 10.1.7.123, 10.1.7.135, 10.1.7.155, 10.1.7.156 (Cloud) | 11.1.7.186 | | 11.1.7.1, 11.1.7.22, 11.1.7.44, 11.1.7.56, 11.1.5.72, 11.1.7.81, 11.1.7.98, 11.1.7.111, 11.1.7.121, 11.1.7.136, 11.1.7.152, 11.1.7.167 | 11.1.7.186 | | IPS-VM5000 | 11.1.7.44, 11.1.7.56, 11.1.5.72, 11.1.7.81, 11.1.7.98, 11.1.7.111, 11.1.7.121, 11.1.7.136, 11.1.7.152, 11.1.7.167 | 11.1.7.186 | | IPS-VM600-VSS-SSL, IPS-VM600-SSL, and IPS-VM5000-SSL | 11.1.7.121, 11.1.7.136, 11.1.7.152, 11.1.7.167 | 11.1.7.186 | > [!WARNING] > Important > > Starting with the 11.1 Update 2 release, the minimum memory requirement for IPS-VM600 deployment on ESXi and KVM is 8 GB. Contact Trellix support for more information and assistance.