--- title: "Sensor Status details" slug: "sensor-status-details-1" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:29:17Z published: 2026-11-19T12:29:17Z canonical: "docs.trellix.com/sensor-status-details-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Sensor Status details The **Status** column against the Sensor listed in the **System Faults** monitor displays one of the following status for the listed Sensors: - **Active**— All channels are up. - **Attention**— One or two communication channels are down. - **Disconnected**— All three communication channels are down. - **Standby**— The Command Channel is still being set up. - **Uninitialized**— There is a failure in the initial setup. - **Unknown**— Displayed when a Sensor has been added to the Trellix IPS user interface, but the actual Sensor has not been set up yet to communicate with the Manager. Clicking the link in the **Status** cell for a Sensor opens the **Summary** page. For Sensors, status is determined by the state of three communication channel parameters: Command Channel, Alert Channel, and Packet Log Channel. The **Summary** page displays information on Sensor health and the three communication channel parameters.