--- title: "sensordroppktevent" slug: "sensordroppktevent-3" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:29:52Z published: 2026-11-19T12:29:52Z canonical: "docs.trellix.com/sensordroppktevent-3" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # sensordroppktevent This command enables or disables the monitoring of Sensor load. Whenever the Sensor is overloaded and drops a large number of packets, a system fault is raised in the Manager. **Syntax:** `sensordroppktevent <disable><enable>` | Parameter | Description | | --- | --- | | | Disables the monitoring of Sensor load | | | Enables the monitoring of Sensor load. When the Sensor load monitoring is enabled, a critical fault "Sensor Dropping Packets Internally" is displayed on the **Faults** tab in the **Logs** page of the Manager if the Sensor drops packets continuously for 9 seconds or more,. If the packet drop continues, another system fault is generated after every minute. Trellix IPS raises subsequent faults only if the packet loss is continuously present for the entire minute. | **Default Value:** Disabled **Applicable to:** NS-series and Virtual IPS Sensors. For Virtual Security System instances, this command is available in debug mode.