This command enables or disables the monitoring of Sensor load. Whenever the Sensor is overloaded and drops a large number of packets, a system fault is raised in the Manager.
Syntax:
sensordroppktevent <disable><enable>
Parameter | Description |
|---|---|
<disable> | Disables the monitoring of Sensor load |
<enable> | Enables the monitoring of Sensor load. When the Sensor load monitoring is enabled, a critical fault "Sensor Dropping Packets Internally" is displayed on the Faults tab in the Logs page of the Manager if the Sensor drops packets continuously for 9 seconds or more,. If the packet drop continues, another system fault is generated after every minute. Trellix IPS raises subsequent faults only if the packet loss is continuously present for the entire minute. |
Default Value:
Disabled
Applicable to:
NS-series and Virtual IPS Sensors. For Virtual Security System instances, this command is available in debug mode.