--- title: "set afo port-pair and dst-mac" slug: "set-afo-port-pair-and-dst-mac-3" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:29:52Z published: 2026-11-19T12:29:52Z canonical: "docs.trellix.com/set-afo-port-pair-and-dst-mac-3" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # set afo port-pair and dst-mac This command is used to configure the destination MAC address in the heartbeat packets sent by the Active Fail-Open (AFO) kit. These packets will be used by Sensor to determine the status of the AFO kit. > [!NOTE] > Note > > Starting with 10.1 Update 10 release, NS-series Sensor models NS9500 and NS7500 support third-party AFO Bypass Kit solutions. To view the list of supported vendors and their AFO kit models, see [KB95945](https://support.trellix.com/s/article/KB95945). If you are using these third-party AFO kits or Trellix AFO kits, you do not need to configure the MAC address, as the Sensors (NS9500 and NS7500) can automatically detect the heartbeat packets. The `set afo` command is useful only for those using other third-party AFO kits that are not included in KB95945. **Syntax:** `set afo <port-pair | all> dst-mac <destination_mac>` | Parameter | Description | | --- | --- | | | A valid gigabit ethernet monitoring port-pair on the Sensor Valid port-pairs for NS9600, NS9500, NS7600, NS7500 Sensors are: g0/1-g0/2 \|g0/3-g0/4 \| g1/1-g1/2 \| g1/3-g1/4 \| g1/5-g1/6 \| g1/7-g1/8 \| g2/1-g2/2 \| g2/3-g2/4 \| g2/5-g2/6 \| g2/7-g2/8 \| g3/1-g3/2 \| g3/3-g3/4 \| g3/5-g3/6 \| g3/7-g3/8 Valid port-pairs for NS3600 Sensor are: 1-2 \| 3-4 \| 5-6 \| 7-8 \| 9-10 \| 11-12 \| 13-14 | | | Includes all the IFO-ACTIVE port-pairs | | | The destination MAC address of the AFO kit which will be used by sensor to determine the status of the AFO kits. | **Example 1:** `intruShell@NS7500> set afo g0/1-g0/2 dst-mac 22:44:66:88:10:12` The above command will set the destination MAC address on port-pair g0/1-g0/2. **Example 2:** `intruShell@NS7500> set afo all dst-mac 22:44:66:88:10:12` The above command will set the destination MAC address on all the IFO-ACTIVE port-pairs. **Applicable to:** NS-series Sensors - NS9600, NS9500, NS7600, NS7500, and NS3600