--- title: "set clearblacklist enable | disable | status" slug: "set-clearblacklist-enable-disable-status" updated: 2026-09-08T19:56:07Z published: 2026-09-08T19:56:07Z canonical: "docs.trellix.com/set-clearblacklist-enable-disable-status" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # set clearblacklist enable | disable | status This command enables or disables a flag for clearing the blacklist from the database while uploading a detection package. By default, this command is disabled. **Syntax**: **`set clearblacklist enable|disable|status`** | Parameter | Description | | --- | --- | | enable | Enable the flag to clear the blacklist after installing the detection package. | | disable | Disable the flag to prevent the blacklist from getting cleared after installing the detection package. | | status | Displays the blacklist clear flag status as 0 or 1. | - If flag status = 0, then it is disabled. - If flag status = 1, then it is enabled. Example: ``` set clearblacklist enable Alert: Blacklist will be cleared during detection package upload. set clearblacklist disable Blacklist will NOT be cleared during detection package upload. set clearblacklist status Blacklist DB clear flag status = 0 or 1 ``` :