--- title: "set gam-behavioral-scan config" slug: "set-gam-behavioral-scan-config-2" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:27:25Z published: 2026-11-19T12:27:25Z canonical: "docs.trellix.com/set-gam-behavioral-scan-config-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # set gam-behavioral-scan config This command allows you to enable or disable behavioral scan on the Gateway Anti-Malware engine. > [!NOTE] > Note > > Gateway Anti-Malware engine behavioral scan is enabled by default. > > This command can be executed only when GAM is enabled in air gap network. Refer to the command set gam-airgap-network to enable or disable GAM in air gap networks. > [!NOTE] > Note > > When both GAM airgap network and GAM behavioral scan configuration are enabled in the Sensor, the GAM engine might get Initialized with the version as 0.0. In such cases, you need to disable the GAM behavioral scan configuration using this command. **Syntax:** `set gam-behavioral-scan config <enable | disable>` **Parameter:** | Parameter | Description | | --- | --- | | `enable` | Enables behavioral scan on the Gateway Anti-Malware engine. | | `disable` | Disables behavioral scan on the Gateway Anti-Malware engine. | **Applicable to:** NS-series