---
title: "set intfport id"
slug: "set-intfport-id"
tags: ["Product Usage", "IPS 10.1.10"]
updated: 2026-10-05T15:40:40Z
published: 2026-10-05T15:40:40Z
canonical: "docs.trellix.com/set-intfport-id"
---
> ## Documentation Index
> Fetch the complete documentation index at: https://docs.trellix.com/llms.txt
> Use this file to discover all available pages before exploring further.
# set intfport id
This command sets the admin status, operating mode, flowcontrol, and speed on the specified gigabit ethernet monitoring port. You can also use this command to set the specified Ethernet monitoring port to full-duplex or half-duplex.
It is not mandatory to use all the following parameters for this command.
**Syntax:**
set intfport id <port> <mediatype copper | optical> <adminstatus up | down> <duplex full|half> <flowcontrol gig | auto> <operating mode ifo | ifc | tap| span> <speed 100MBPS|10GBPS|10MBPS|1GBPS|1GBPS-auto>
| Parameter | Description |
| --- | --- |
| | A valid ethernet monitoring port on the Sensor Valid port numbers for NS-series are: G0/1 \| G0/2 \| G1/1 \| G1/2 \| G1/3 \| G1/4 \| G1/5 \| G1/6 \| G1/7 \| G1/8 \| G1/9 \| G1/10 \| G1/11 \| G1/12 \| G2/1 \| G2/2 \| G2/3 \| G2/4 \| G2/5 \| G2/6 \| G2/7 \| G2/8 \| G2/9 \| G2/10 \| G2/11 \| G2/12 \| G3/1 \| G3/2 \| G3/3 \| G3/4 \| G3/5 \| G3/6 \| G3/7 \| G3/8 |
| | Sets interface media type to Copper or Optical Fibre |
| | Enables or disables the interface port |
| | Sets this interface port to full or half duplex |
| | Changes the operating mode in-line fail-open line fail-close, tap or span |
| | Sets interface port speed to 100MBPS, 10GBPS, 10MBPS, 1GBPS, or 1GBPS-auto negotiate |
**Example:**
set intfport id 4B speed 1GBPS-auto
**Applicable to:**
NS-series Sensors