--- title: "set l2OnDrops" slug: "set-l2ondrops-3" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:29:52Z published: 2026-11-19T12:29:52Z canonical: "docs.trellix.com/set-l2ondrops-3" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # set l2OnDrops This command configures the settings for Layer 2 mode on drops. **Syntax:** `set l2OnDrops (enable|disable|sensitivity-level)` | Parameter | Description | | --- | --- | | `enable` | Puts the Sensor to Layer 2 mode when high drops are seen | | `disable` | Disables Layer 2 mode on drops | | `sensitivity-level` | Configures the sensitivity level for Layer 2 mode on drops | **Sample Output:** `intruShell@john> set l2OnDrops enable` `intruShell@john> show l2OnDropsConfig` `L2OnDrops Stats: Enabled` > [!NOTE] > Note > > To view the status of `set l2OnDrops`, provide `show l2OnDropsConfig` command. **Applicable to:** NS-series Sensors > [!NOTE] > Note > > - The Layer 2 mode must be **'ON'** to configure `set l2OnDrops (enable|disable|sensitivity-level)`. > - To automatically restore the Sensor to normal state, configure `latency-monitor restore-inline` command. For more information, refer to [latency-monitor restore-inline](/network-and-platform/docs/latency-monitor-restore-inline-3). > - For more information on `set l2OnDrops sensitivity-level` command, refer to [set l2OnDrops sensitivity-level](/network-and-platform/docs/set-l2ondrops-sensitivity-level-3). > - For more information on `show l2OnDropsConfig` command, refer to [show l2OnDropsConfig](/network-and-platform/docs/show-l2ondropsconfig-3).