--- title: "set manager alertport" slug: "set-manager-alertport-3" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:29:52Z published: 2026-11-19T12:29:52Z canonical: "docs.trellix.com/set-manager-alertport-3" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # set manager alertport This command specifies the port on which the Manager listens to the Sensor alerts. You can assign any unassigned port for this communication. If the Sensor and the Manager are separated by a firewall, you must make sure to open the specified port on the firewall. If your Sensor is already installed, deinstall the Sensor before changing this parameter. **Syntax:** `set manager alertport <0 - 10000>` | Parameter | Description | | --- | --- | | <0-10000> | The port number ranging from integer values 0 to 10000. | On executing the command, the following messages are displayed- - When Sensor is installed: `sensor is already installed, please do a deinstall before changing this parameter` - When Sensor is de-installed: `Missing manager alert port, default 8502 used` **Default Value:** Default port number is 8502. **Applicable to:** NS-series Sensors