--- title: "set manager logport" slug: "set-manager-logport-3" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:29:52Z published: 2026-11-19T12:29:52Z canonical: "docs.trellix.com/set-manager-logport-3" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # set manager logport This command helps specify the port on which the Manager listens to the Sensor alerts when and Manager and Sensor use 2048-bit encryption. You can assign any unassigned port for this communication. If the Sensor and the Manager are separated by a firewall, you must make sure to open the specified port on the firewall. If your Sensor is already installed, deinstall the Sensor before changing this parameter. **Syntax:** `set manager logport <0 - 10000>` | Parameter | Description | | --- | --- | | <0-10000> | The port number ranging from integer values 0 to 10,000 | On executing the command, the following messages are displayed- - When Sensor is installed: `sensor is already installed, please do a deinstall before changing this parameter` - When Sensor is de-installed: `Missing manager log port, default 8503 used` **Default Value:** Default port number is 8503. **Applicable to:** NS-series Sensors