Configures the network port to match the speed of the network device connecting to the Intelligent Sandbox Appliance, then runs in full- or half-duplex mode.
Syntax:
set mgmtport <speed <10 | 100> duplex <full | half>>
Parameter | Description |
|---|---|
<10|100> | Specifies the speed on the Ethernet network port. The speed value can be either 10 or 100 Mbps. To set the speed to 1000 Mbps, use the set mgmtport auto command. |
<half|full> | Specifies the duplex setting on the Ethernet network port.
|
Default Value:
By default, the network port is set to auto (auto-negotiate).