--- title: "set mgmtport speed and duplex" slug: "set-mgmtport-speed-and-duplex-1" tags: ["Product Usage", "IPS 10.1.10"] updated: 2026-10-05T15:41:01Z published: 2026-10-05T15:41:01Z canonical: "docs.trellix.com/set-mgmtport-speed-and-duplex-1" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # set mgmtport speed and duplex This command helps configure the management port to match the speed of the network device connecting to the Sensor and to run in full-duplex or half-duplex mode. **Syntax:** set mgmtport <speed <10 | 100> duplex <full | half>> | Parameter | Description | | --- | --- | | <10\|100> | Sets the speed on the ethernet management port. The speed value can be either 10 or 100 Mbps. To set the speed to 1000 Mbps, use the set mgmtport auto command. | | | Sets the duplex setting on the ethernet management port. Set the value half for half-duplex and full for full-duplex. | > [!NOTE] > Note > > The NS9500 and NS7500 Sensor models do not support this command. The speed of the management port in these Sensors is set to **auto** by default. **Default Value:** By default, the management port is set to **auto** (auto-negotiate). **Applicable to:** NS-series Sensors except NS9500 and NS7500