--- title: "set mgmtport speed and duplex" slug: "set-mgmtport-speed-and-duplex-4" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:29:52Z published: 2026-11-19T12:29:52Z canonical: "docs.trellix.com/set-mgmtport-speed-and-duplex-4" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # set mgmtport speed and duplex This command helps configure the management port to match the speed of the network device connecting to the Sensor and to run in full-duplex or half-duplex mode. **Syntax:** `set mgmtport speed <10 | 100 | 1000 | 10000> duplex <half | full>` | Parameter | Description | | --- | --- | | <10 \| 100 \| 1000 \| 10000> | Sets the speed on the ethernet management port. The speed value can be between 10 and 10000 Mbps depending on the Sensor model used. | | | Sets the duplex setting on the ethernet management port. Set the value `half` for half-duplex and `full` for full-duplex. | > [!NOTE] > Note > > The NS9600, NS9500, NS7600, and NS7500 Sensor models do not support this command. The speed of the management port in these Sensors is set to **auto** by default. **Default Value:** By default, the management port is set to **auto** (auto-negotiate). > [!NOTE] > Note > > Management port speed settings vary depending on the Sensor model used. > [!NOTE] > Note > > Availability of half duplex option depends on the management port speed you set. Duplex option is not available in 9100, 9200, and 9300 Sensors. **Applicable to:** NS-series Sensors (except NS9600, NS9500, NS7600, NS7500, and NS3600)