--- title: "set mgmtport speed and duplex" slug: "set-mgmtport-speed-and-duplex" updated: 2026-09-08T19:56:07Z published: 2026-09-08T19:56:07Z canonical: "docs.trellix.com/set-mgmtport-speed-and-duplex" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # set mgmtport speed and duplex Configures the network port to match the speed of the network device connecting to the Intelligent Sandbox Appliance, then runs in full- or half-duplex mode. ##### **Syntax:** **`set mgmtport <speed <10 | 100> duplex <full | half>>`** | Parameter | Description | | --- | --- | | <10\|100> | Specifies the speed on the Ethernet network port. The speed value can be either 10 or 100 Mbps. To set the speed to 1000 Mbps, use the set mgmtport auto command. | | | Specifies the duplex setting on the Ethernet network port. - half — Half duplex - full — Full duplex | **Default Value:** By default, the network port is set to **auto** (auto-negotiate). :