--- title: "set network configuration" slug: "set-network-configuration-2" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:26:59Z published: 2026-11-19T12:26:59Z canonical: "docs.trellix.com/set-network-configuration-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # set network configuration This command is used to configure network parameters for the Linux based Manager. > [!NOTE] > Note > > Reboot the Linux based Manager machine after executing `set network configuration` command for successful configuration of the network parameters. **Syntax:**`set network configuration` `Select the type of NIC configuration:` `Please select one of the below option:` `1 -> Configure Single NIC` `2 -> Configure Both the NIC's` `Input 1 or 2 based on you selection :<1/2>` `Enter the NIC you want to configure with public network ip:` `1 -> eth0 [NIC 1]` `2 -> eth1 [NIC 2]` `Input 1 or 2 based on your selection : <1/2>` `Enter the DOMAIN NAME : <Manager_Domain_Name>` `Enter the HOSTNAME : <Manager_Hostname>` `Configuring <eth0/eth1> with public ip` `Enter the IP ADDRESS : <Manager_Public_IP_Address>` `Enter the NETMASK : <Netmask_IP_Address>` `Enter the GATEWAY : <Gateway_IP_Address>` `Enter the DNS1 : <DNS1_Server_IP_Address>` `Do you want to set DNS2 ? (y/n): <y/n>` `Enter the DNS2 : <DNS2_Server_IP_Address>` `Configuring <eth0/eth1> with private ip` `Enter the IP ADDRESS : <Manager_Private_IP_Address>` | Parameters | Description | | --- | --- | | `Manager_Domain_Name` | Enter the domain name for the Manager server. | | `Manager_Hostname` | Enter the hostname to be assigned to the Manager server. | | `Manager_Public_IP_Address` | Enter the public IP address to be assigned to the Manager server. | | `Netmask_IP_Address` | Enter the subnet mask for the Manager server. | | `Gateway_IP_Address` | Enter the gateway address for the Manager server. | | `DNS1_Server_IP_Address` | Enter primary DNS server IP address. | | `<y/n>` | Type `y`, if you want to configure secondary DNS server IP address, or else type `n`. | | `DNS2_Server_IP_Address` | (Optional) Enter secondary DNS server IP address. | | `Manager_Private_IP_Address` | Enter the private IP address to be assigned to the Manager server. | **Sample Output:** `IPSManager> set network configuration` `[sudo] password for admin:` `*****Setting up all the required network configuration.*****` `Select the type of NIC configuration:` `Please select one of the below option:` `1 -> Configure Single NIC` `2 -> Configure Both the NIC's` `Input 1 or 2 based on you selection : 2` `Enter the NIC you want to configure with public network ip:` `1 -> eth0 [NIC 1]` `2 -> eth1 [NIC 2]` `Input 1 or 2 based on your selection : 1` `Enter the DOMAIN NAME : mydomain.com` `Enter the HOSTNAME : mycompany` `Configuring eth0 with public ip` `Enter the IP ADDRESS : 10.1.1.1` `Enter the NETMASK : 255.255.255.0` `Enter the GATEWAY : 10.1.1.252` `Enter the DNS1 : 10.1.2.11` `Do you want to enter DNS2 ? (y/n): y` `Enter the DNS2 : 10.2.1.3.` `Configuring eth1 with private ip` `Enter the IP ADDRESS : 10.1.1.7` `Your mac address is 00:50:56:89:ec:83` `*****Networking configuration setup complete.*****` `Restarting network (via systemctl): [ OK ]`