--- title: "set network configuration" slug: "set-network-configuration" tags: ["Product Usage", "IPS 10.1.10"] updated: 2026-10-05T15:40:19Z published: 2026-10-05T15:40:19Z canonical: "docs.trellix.com/set-network-configuration" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # set network configuration This command is used to configure network parameters for the Linux based Manager. > [!NOTE] > Note > > Reboot the Linux based Manager machine after executing set network configuration command for successful configuration of the network parameters. **Syntax:** set network configuration Select the type of NIC configuration: Please select one of the below option: 1 -> Configure Single NIC 2 -> Configure Both the NIC's Input 1 or 2 based on you selection :<1/2> Enter the NIC you want to configure with public network ip: 1 -> eth0 [NIC 1] 2 -> eth1 [NIC 2] Input 1 or 2 based on your selection : <1/2> Enter the DOMAIN NAME : <Manager_Domain_Name> Enter the HOSTNAME : <Manager_Hostname> Configuring <eth0/eth1> with public ip Enter the IP ADDRESS : <Manager_Public_IP_Address> Enter the NETMASK : <Netmask_IP_Address> Enter the GATEWAY : <Gateway_IP_Address> Enter the DNS1 : <DNS1_Server_IP_Address> Do you want to set DNS2 ? (y/n): <y/n> Enter the DNS2 : <DNS2_Server_IP_Address> Configuring <eth0/eth1> with private ip Enter the IP ADDRESS : <Manager_Private_IP_Address> | Parameters | Description | | --- | --- | | Manager_Domain_Name | Enter the domain name for the Manager server. | | Manager_Hostname | Enter the hostname to be assigned to the Manager server. | | Manager_Public_IP_Address | Enter the public IP address to be assigned to the Manager server. | | Netmask_IP_Address | Enter the subnet mask for the Manager server. | | Gateway_IP_Address | Enter the gateway address for the Manager server. | | DNS1_Server_IP_Address | Enter primary DNS server IP address. | | <y/n> | Type y, if you want to configure secondary DNS server IP address, or else type n. | | DNS2_Server_IP_Address | (Optional) Enter secondary DNS server IP address. | | Manager_Private_IP_Address | Enter the private IP address to be assigned to the Manager server. | **Sample Output:** IPSManager> set network configuration [sudo] password for admin: *****Setting up all the required network configuration.***** Select the type of NIC configuration: Please select one of the below option: 1 -> Configure Single NIC 2 -> Configure Both the NIC's Input 1 or 2 based on you selection : 2 Enter the NIC you want to configure with public network ip: 1 -> eth0 [NIC 1] 2 -> eth1 [NIC 2] Input 1 or 2 based on your selection : 1 Enter the DOMAIN NAME : mydomain.com Enter the HOSTNAME : mycompany Configuring eth0 with public ip Enter the IP ADDRESS : 10.1.1.1 Enter the NETMASK : 255.255.255.0 Enter the GATEWAY : 10.1.1.252 Enter the DNS1 : 10.1.2.11 Do you want to enter DNS2 ? (y/n): y Enter the DNS2 : 10.2.1.3. Configuring eth1 with private ip Enter the IP ADDRESS : 10.1.1.7 Your mac address is 00:50:56:89:ec:83 *****Networking configuration setup complete.***** Restarting network (via systemctl): [ OK ]