set network ipv6

Prev Next

You can specify an IPv6 address for the Manager server using this command.

Syntax: set network ipv6

Enter the DOMAIN NAME : <Manager_Domain_Name>

Enter the HOST NAME : <Manager_Hostname>

Enter the IPv6 ADDRESS : <Manager_IPv6_Address>/<Prefix_Length>

Enter the IPv6 GATEWAY : <Gateway_IP_Address>

Enter the DNS1 : <DNS1_Server_IP_Address>

Do you want to set DNS2 ? (y/n): <y/n>

Enter the DNS2 : <DNS2_Server_IP_Address>

Parameters

Description

Manager_Domain_Name

Enter the domain name for the Manager server.

Manager_Hostname

Enter the hostname to be assigned to the Manager server.

Manager_IPv6_Address/Prefix_Length

Enter the IPv6 address to be assigned to the Manager server/Provide the prefix length.

Example: fe80::2/64

Gateway_IP_Address

Enter the gateway address for the Manager server.

DNS1_Server_IP_Address

Enter the primary DNS server IP address.

<y/n>

Type y, if you want to configure a secondary DNS server IP address, or else type n.

DNS2_Server_IP_Address

(Optional) Enter the secondary DNS server IP address.

Sample Output:

IPSManager> set network configuration

########################## Configuring IPv6 Network ###########################

# #

# [NOTE]: #

# > Only ethO can be configured #

# > Network service will be restarted at the end of the configuration #

# > The system will reboot after complete configuration #

# > Input 'quit' at any step to quit configuration #

# #

###############################################################################

Enter the DOMAIN NAME : mydomain.com

Enter the HOSTNAME : mycompany

Enter the IPv6 ADDRESS : 0:0:0:fe80:0:0:1010:0101

Enter the IPv6 GATEWAY : 0:0:0:fe80:0:0:1010:001l

Enter the DNS1 : 0:0:0:0:1111

Do you want to enter DNS2 ? (y/n): y

Enter the DNS2 : 0:0:0:1111:1111

Note

  • The system will automatically reboot after complete configuration.

  • To confirm the configured IPv6 address, use nmcli or show network ip.