You can specify an IPv6 address for the Manager server using this command.
Syntax: set network ipv6
Enter the DOMAIN NAME : <Manager_Domain_Name>
Enter the HOST NAME : <Manager_Hostname>
Enter the IPv6 ADDRESS : <Manager_IPv6_Address>/<Prefix_Length>
Enter the IPv6 GATEWAY : <Gateway_IP_Address>
Enter the DNS1 : <DNS1_Server_IP_Address>
Do you want to set DNS2 ? (y/n): <y/n>
Enter the DNS2 : <DNS2_Server_IP_Address>
Parameters | Description |
|---|---|
| Enter the domain name for the Manager server. |
| Enter the hostname to be assigned to the Manager server. |
| Enter the IPv6 address to be assigned to the Manager server/Provide the prefix length. Example: |
| Enter the gateway address for the Manager server. |
| Enter the primary DNS server IP address. |
| Type |
| (Optional) Enter the secondary DNS server IP address. |
Sample Output:
IPSManager> set network configuration
########################## Configuring IPv6 Network ###########################
# #
# [NOTE]: #
# > Only ethO can be configured #
# > Network service will be restarted at the end of the configuration #
# > The system will reboot after complete configuration #
# > Input 'quit' at any step to quit configuration #
# #
###############################################################################
Enter the DOMAIN NAME : mydomain.com
Enter the HOSTNAME : mycompany
Enter the IPv6 ADDRESS : 0:0:0:fe80:0:0:1010:0101
Enter the IPv6 GATEWAY : 0:0:0:fe80:0:0:1010:001l
Enter the DNS1 : 0:0:0:0:1111
Do you want to enter DNS2 ? (y/n): y
Enter the DNS2 : 0:0:0:1111:1111
Note
The system will automatically reboot after complete configuration.
To confirm the configured IPv6 address, use
nmcliorshow network ip.