--- title: "set nsp-tcp-channel enable | disable" slug: "set-nsp-tcp-channel-enable-disable" updated: 2026-09-08T19:56:25Z published: 2026-09-08T19:56:25Z canonical: "docs.trellix.com/set-nsp-tcp-channel-enable-disable" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # set nsp-tcp-channel enable | disable Enables or disables communication between Trellix IPS and Intelligent Sandbox over TCP. **set nsp-tcp-channel enable**: - This will switch Intelligent Sandbox to use TCP channel to communicate with Trellix IPS. - When the command **`set nsp-tcp-channel enable`** is executed in Intelligent Sandbox, check the MATD channel in use in Trellix IPS. - Log on to the Sensor CLI and enter into debug mode. - Execute the CLI command **`show matd channel.`** - If the MATD Trellix IPS channel type is seen as SSL, execute the CLI command **`switch matd channel tcp`** to switch to TCP channel . - Execute **`set amchannelencryption off`**. **set nsp-tcp-channel disable**: - This will switch Intelligent Sandbox to use SSL encrypted channel to communicate with Trellix IPS. - Encrypted data transfer from Trellix IPS. - When SSL encryption is enabled on Intelligent Sandbox and Trellix IPS, the data sent from Trellix IPS to Intelligent Sandbox is encrypted. - There would be no support for NULL cipher from 4.10.x release onwards. - When the command **`set nsp-tcp-channel disable`** is executed in Intelligent Sandbox, check the MATD channel in use in Trellix IPS. - Log on to the Sensor CLI and enter into the debug mode. - If the MATD Trellix IPS channel type is seen as TCP, execute the CLI command **`switch matd channel SSL`** to switch to SSL channel. - Execute **`set amchannelencryption on`**. **Syntax**: **` set nsp-tcp-channel enable | disable`** | Parameter | Description | | --- | --- | | enable | Enable TCP channel support | | disable | Disable TCP channel support | **Example**: ``` set nsp-tcp-channel enable NSP TCP Channel Support Enabled and restarted service ``` :