--- title: "set port 6080" slug: "set-port-6080" updated: 2026-09-08T19:56:25Z published: 2026-09-08T19:56:25Z canonical: "docs.trellix.com/set-port-6080" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # set port 6080 You can enable or disable port 6080 for specified interfaces or for all interfaces using this command. - Enable or disable the port 6080 on eth0 interface. **Syntax**: **` set port 6080 <enable or disable> eth0`** - Enable or disable the port 6080 on eth1 interface. **Syntax**: **` set port 6080 <enable or disable> eth1`** - Enable or disable the port 6080 on eth2 interface. **Syntax**: **` set port 6080 <enable or disable> eth2`** - Enable or disable the port 6080 on eth3 interface. **Syntax**: **` set port 6080 <enable or disable> eth3`** - Enable or disable the port 6080 on all eth interfaces. **Syntax**: **` set port 6080 <enable or disable> all`** vATD supports only two interfaces (eth0 and eth1), but actual appliance supports four interfaces (eth0, eth1, eth2 and eth3). So when you enable or disable the port for interfaces eth2 and eth3 in vATD, you will the message as " not supported for vATD". **Syntax**: **` set port 6080 disable eth2`** ``` eth2 not supported for vATD ``` **Syntax**: **` set port 6080 disable eth3`** ``` eth3 not supported for vATD ``` :