This command helps specify IPv4 address of the gateway for the Manager server.
Syntax:
set sensor gateway <A.B.C.D>
Parameter | Description |
|---|---|
<A.B.C.D> | A 32-bit address written as four eight-bit numbers separated by periods. Each number (A,B,C, or D) represents an eight-bit number between 0-255. |
Sample Output:
For Sensor, the output is as shown below:
intruShell@john> set sensor gateway 10.213.174.201
sensor gateway = 10.213.174.201
Example:
set sensor gateway 192.34.2.8
Applicable to:
NS-series Sensors