--- title: "set sensor ipv6" slug: "set-sensor-ipv6-3" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:29:52Z published: 2026-11-19T12:29:52Z canonical: "docs.trellix.com/set-sensor-ipv6-3" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # set sensor ipv6 You can set the Sensor's IPv6 address and subnet mask using this command. **Syntax**: `set sensor ipv6 <A:B:C:D:E:F:G:H/I>` | Parameter | Description | | --- | --- | | | Indicates a 64-bit address written as octet (eight groups) of four hexadecimal numbers, separated by colons. Each group (A,B,C,D, etc.) represents a group of hexadecimal numbers between 0000-FFFF. This is followed by a prefix length I with value between 0 and 128. | **Example**: `set sensor ipv6 2001:0db8:8a2e:0000:0000:0000:0000:0111/64` > [!NOTE] > Note > > If one or more four-digit group(s) is 0000, the zeros may be omitted and replaced with two colons (::). For example: `set sensor ipv6 2001:0db8:8a2e::0111/64` **Applicable to:** NS-series Sensors