---
title: "set sensor ipv6"
slug: "set-sensor-ipv6"
tags: ["Product Usage", "IPS 10.1.10"]
updated: 2026-10-05T15:41:01Z
published: 2026-10-05T15:41:01Z
canonical: "docs.trellix.com/set-sensor-ipv6"
---
> ## Documentation Index
> Fetch the complete documentation index at: https://docs.trellix.com/llms.txt
> Use this file to discover all available pages before exploring further.
# set sensor ipv6
You can set the Sensor's IPv6 address and subnet mask using this command.
**Syntax**:
set sensor ipv6 <A:B:C:D:E:F:G:H/I>
| Parameter | Description |
| --- | --- |
| | Indicates a 64-bit address written as octet (eight groups) of four hexadecimal numbers, separated by colons. Each group (A,B,C,D, etc.) represents a group of hexadecimal numbers between 0000-FFFF. This is followed by a prefix length I with value between 0 and 128. |
**Example**:
set sensor ipv6 2001:0db8:8a2e:0000:0000:0000:0000:0111/64
> [!NOTE]
> Note
>
> If one or more four-digit group(s) is 0000, the zeros may be omitted and replaced with two colons (::). For example: set sensor ipv6 2001:0db8:8a2e::0111/64
**Applicable to:**
NS-series Sensors