--- title: "set sensor name" slug: "set-sensor-name-3" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:29:52Z published: 2026-11-19T12:29:52Z canonical: "docs.trellix.com/set-sensor-name-3" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # set sensor name This command enables you to set the name of the Sensor. This name is used to identify the Sensor to the Manager and to identify the Sensor to the admin in the Manager interface. The name you use here in the CLI to identify the Sensor must match the name you use in the Manager interface, or the Manager and Sensor will be unable to communicate. **Syntax**: `set sensor name <WORD> <NODE ID>` | Parameter | Description | | --- | --- | | | Indicates a case-sensitive character string up to 25 characters. The string can include hyphens, underscores, and periods, and must begin with a letter. | | | Indicates the node ID of the Sensor if it is part of a stack. | **Sample Output:** On executing the command, the following messages are displayed- - When Sensor is installed: `sensor is already installed, please do a deinstall before changing this parameter` - When Sensor is de-installed: - `intruShell@john> set sensor name admin` `sensor name = admin` **Example:** `set sensor name SanJose_Sensor1` **Applicable to:** NS-series Sensors