--- title: "set sessionlimit timeout" slug: "set-sessionlimit-timeout" tags: ["Product Usage", "IPS 10.1.10"] updated: 2026-10-05T15:41:01Z published: 2026-10-05T15:41:01Z canonical: "docs.trellix.com/set-sessionlimit-timeout" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # set sessionlimit timeout Use this command to set a time limit for a user session. **Syntax:** set sessionlimit timeout <0-24> The valid range of values for a session are from 0 to 24 hours. For example, if the session time limit is set to 9 hours, the session is automatically closed once the user has worked on the session for 9 hours. If the parameter is set as 0, the session timeout does not happen unless the user closes the session. > [!NOTE] > Note > > The session timeout set is saved and is the same value when the Sensor comes up the next time. > [!NOTE] > Note > > The timeout value set is applicable to all users. **Applicable to:** NS-series Sensors