--- title: "set sslLogging" slug: "set-ssllogging-2" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:53:46Z published: 2026-11-19T12:53:46Z canonical: "docs.trellix.com/set-ssllogging-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # set sslLogging The `set sslLogging <enable/disable> <verbose/info/error> <number of packets> <source IP> <destination IP>` command is used to enable or disable SSL logging. | Parameter | Description | | --- | --- | | `enable/disable` | To enable or disable the session logging. | | `verbose/info/error` | Three different types of logging mode are supported. | | `number of packets` | Number of packets to dump in `sensor.dbg` for logs. | | `source IP` | Source IP address of session logging. | | `destination IP` | Destination IP address of session logging. | > [!TIP] > Tip > > - If the destination IP address is set to `0.0.0.0`, session logging will be enabled/disabled across all destinations. > - After running traffic run between source IP and destination IP, execute `show ssl proxy sessioninfo`. For more information, see [show ssl proxy sessioninfo](https://docs.trellix.com/bundle/intrusion-prevention-system-11.1.x-product-guide/page/UUID-82460599-7b89-c389-7720-7afc41545cd2.html). **Sample output:** ```plaintext IntruDbg#> set sslLogging enable verbose 4 1.1.1.9 0.0.0.0 ********************************************************************* WARNING enabling this command can slow down sensor performance Each sibyte will dump 4 ctrl packets Please monitor sensor.dbg for logs Command executed sucessfully ********************************************************************* ``` > [!TIP] > Tip > > Trellix recommends disabling the SSL session logging after the troubleshooting process. **Applicable to:** NS9600 (standalone and stack), NS9500 (standalone), NS7600, NS7500, NS3600, VM600-SSL, VM600-VSS-SSL, and VM5000-SSL Sensors