--- title: "set tcpudpchecksumerror forward" slug: "set-tcpudpchecksumerror-forward-3" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:29:52Z published: 2026-11-19T12:29:52Z canonical: "docs.trellix.com/set-tcpudpchecksumerror-forward-3" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # set tcpudpchecksumerror forward When executed, this command prevents the Sensor from dropping the TCP/UDP/ICMP checksum error packets. The Sensor re-computes TCP, UDP and ICMP header checksums to determine if their corresponding packets have been corrupted. If the checksum fails, the packet is dropped. This is standard Sensor behavior. The `set tcpudpchecksumerror forward` command overrides the check, and is useful in situations where the Sensor is located on segments where the IP options Loose Source Record Routing (LSRR) or Strict Source Routing are enabled, which produce valid traffic with invalid checksums that the Sensor would otherwise drop. This command has no parameters. **Syntax**: `set tcpudpchecksumerror forward` **Default Value**: This feature is disabled by default. The Sensor is set to drop packets with invalid headers (that is, the value is set to `set tcpudpchecksumerror drop`). **Applicable to:** NS-series Sensors