set tftpserver ip

Prev Next

This command helps specify the IPv4 or IPv6 address of your TFTP server.

Syntax:

set tftpserver ip <A.B.C.D> | <A:B:C:D:E:F:G:H>

Parameter Description
<A.B.C.D> Indicates a 32-bit address written as four eight-bit numbers separated by periods. Each number (A,B,C, or D) represents an eight-bit number between 0-255.
<A:B:C:D:E:F:G:H> Indicates a 128-bit address written as octet (eight groups) of four hexadecimal numbers, separated by colons. Each group (A,B,C,D, etc.) represents a group of hexadecimal numbers between 0000-FFFF.
Sample Output:

For Sensor, the output is as shown below:

intruShell@john> set tftpserver ip 192.34.5.12

TFTP Server IP = 192.34.5.12

Example:

set tftpserver ip 192.34.2.54

Or,

set tftpserver ip 2001:0db8:8a2e:0000:0000:0000:0000:0111

Note

If one or more four-digit group(s) is 0000, the zeros may be omitted and replaced with two colons (::).

Applicable to:

NS-series Sensors