--- title: "set tftpserver ip" slug: "set-tftpserver-ip-3" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:29:52Z published: 2026-11-19T12:29:52Z canonical: "docs.trellix.com/set-tftpserver-ip-3" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # set tftpserver ip This command helps specify the IPv4 or IPv6 address of your TFTP server. **Syntax:** `set tftpserver ip <A.B.C.D> | <A:B:C:D:E:F:G:H>` | Parameter | Description | | --- | --- | | | Indicates a 32-bit address written as four eight-bit numbers separated by periods. Each number (A,B,C, or D) represents an eight-bit number between 0-255. | | | Indicates a 128-bit address written as octet (eight groups) of four hexadecimal numbers, separated by colons. Each group (A,B,C,D, etc.) represents a group of hexadecimal numbers between 0000-FFFF. | **Sample Output:** For Sensor, the output is as shown below: `intruShell@john> set tftpserver ip 192.34.5.12` `TFTP Server IP = 192.34.5.12` **Example:** `set tftpserver ip 192.34.2.54` Or, `set tftpserver ip 2001:0db8:8a2e:0000:0000:0000:0000:0111` > [!NOTE] > Note > > If one or more four-digit group(s) is 0000, the zeros may be omitted and replaced with two colons (::). **Applicable to:** NS-series Sensors