This command helps specify the IPv4 or IPv6 address of your TFTP server.
Syntax:
set tftpserver ip <A.B.C.D> | <A:B:C:D:E:F:G:H>
Parameter | Description |
|---|---|
<A.B.C.D> | Indicates a 32-bit address written as four eight-bit numbers separated by periods. Each number (A,B,C, or D) represents an eight-bit number between 0-255. |
<A:B:C:D:E:F:G:H> | Indicates a 128-bit address written as octet (eight groups) of four hexadecimal numbers, separated by colons. Each group (A,B,C,D, etc.) represents a group of hexadecimal numbers between 0000-FFFF. |
Sample Output:
For Sensor, the output is as shown below:
intruShell@john> set tftpserver ip 192.34.5.12
TFTP Server IP = 192.34.5.12
Example:
set tftpserver ip 192.34.2.54
Or,
set tftpserver ip 2001:0db8:8a2e:0000:0000:0000:0000:0111
Note
If one or more four-digit group(s) is 0000, the zeros may be omitted and replaced with two colons (::).
Applicable to:
NS-series Sensors