--- title: "Set the CPU usage threshold for devices within a child domain" slug: "set-the-cpu-usage-threshold-for-devices-within-a-child-domain" tags: ["Product Usage", "IPS 10.1.10"] updated: 2026-10-05T15:39:47Z published: 2026-10-05T15:39:47Z canonical: "docs.trellix.com/set-the-cpu-usage-threshold-for-devices-within-a-child-domain" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Set the CPU usage threshold for devices within a child domain Follow this procedure for setting the CPU usage threshold for all devices within the child admin domain. ## Task 1. Select **Devices** → **** → **Global** → **Common Device Settings** → **Performance Monitoring** → **Thresholds**. Thresholds area ![cpu_threshold_setting_child_admin_domain_node](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-1BD5E5F8-4DDF-4031-B89F-55764190AA08-low.png?sv=2026-02-06&spr=https&st=2026-11-20T12%3A56%3A54Z&se=2026-11-20T13%3A56%3A54Z&sr=c&sp=r&sig=XDGG2obpZEYl7H2eVKtviogj9fPBNIsbBlN%2F2DBu9D8%3D) 2. Select **CPU Usage** in the drop down list against **Metric**. 3. Enter the required threshold percentage in the **Threshold [%]** column (this value should be higher than the value in the **Reset Threshold [%]** column). 4. Select the **Generate Fault?** checkbox to enable generation of fault. Deselect the **Generate Fault?** checkbox to disable generation of fault. 5. Click **Save** to save your settings. > [!NOTE] > Note > > Click **Defaults** to set the threshold settings to the default values. The threshold values can be changed only if the checkbox against **Inherit Settings?** is deselected. If this checkbox is checked the settings from the parent admin domain are automatically inherited.