--- title: "Set the L2 error drop threshold for devices within the child admin domain" slug: "set-the-l2-error-drop-threshold-for-devices-within-the-child-admin-domain" tags: ["Product Usage", "IPS 10.1.10"] updated: 2026-10-05T15:39:47Z published: 2026-10-05T15:39:47Z canonical: "docs.trellix.com/set-the-l2-error-drop-threshold-for-devices-within-the-child-admin-domain" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Set the L2 error drop threshold for devices within the child admin domain Follow this procedure for setting the L2 Error Drop threshold for devices within a child admin domain. ## Task 1. Select **Devices** → **** → **Global** → **Common Device Settings** → **Performance Monitoring** → **Thresholds**. Thresholds area ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-5AB11C53-4CF9-4606-9A5D-AD0A85D6597B-low.png?sv=2026-02-06&spr=https&st=2026-11-22T14%3A13%3A13Z&se=2026-11-22T15%3A13%3A13Z&sr=c&sp=r&sig=RhLhGprutO%2BJW1ZvEyTo4zKHC%2BtaCf%2FfVwXIIkWKR9Y%3D) 2. Select **L2 Error Drop** in the drop down list against **Metric**. 3. Enter the required threshold the **Threshold [counts/min]** column (this value should be higher than the value in the **Reset Threshold [counts/min]** column). 4. Select **Generate Fault?** to enable fault. 5. Click **Save** to save your settings. > [!NOTE] > Note > > Click **Defaults** to set the threshold settings to the default values. The threshold values can be changed only if the checkbox against **Inherit Settings?** is deselected. If this checkbox is selected, the settings from the parent admin domain are automatically inherited.