--- title: "Set the L3/L4 Error Drop threshold for devices within an admin domain" slug: "set-the-l3-l4-error-drop-threshold-for-devices-within-an-admin-domain" tags: ["Product Usage", "IPS 10.1.10"] updated: 2026-09-06T12:32:06Z published: 2026-10-05T15:41:20Z canonical: "docs.trellix.com/set-the-l3-l4-error-drop-threshold-for-devices-within-an-admin-domain" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Set the L3/L4 Error Drop threshold for devices within an admin domain Follow this procedure for setting the L3/L4 Drop Threshold for devices within the root admin domain. ## Task 1. Select **Device** → **** → **Global** → **Common Device Settings** → **Performance Monitoring** → **Thresholds**. Thresholds dialog ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-03B9BEDB-B264-44E2-B973-2955E9479394-low.png?sv=2026-02-06&spr=https&st=2026-11-22T13%3A56%3A42Z&se=2026-11-22T14%3A56%3A42Z&sr=c&sp=r&sig=YVBZlXhnXgepNAwbRHUKyTQMwZguZE1B%2BYZODQ4vimc%3D) 2. Select **L3/L4 Error Drop** in the drop down list against **Metric**. 3. Enter the required threshold in the **Threshold [counts/min]** column (this value should be higher than the value in the **Reset Threshold [counts/min]** column). 4. Select the **Generate Fault?** checkbox to generate fault. Deselect the **Generate Fault?** checkbox to disable generation of fault. 5. Click **Save** to save your settings. > [!NOTE] > Note > > Click **Defaults** to set the threshold settings to the default values.