Set the management port speed and the duplex mode

Prev Next

Task

Set the speed of the Management port and determine whether the port should be set to half-duplex or full-duplex. At the prompt, type:
set mgmtport speed <10 | 100 | 1000> duplex <half | full>
where< 10> indicates 10 Mbps, < 100> indicates 100 Mbps, < 1000> indicates 1000 Mbps, < half> indicates half-duplex, and < full > indicates full-duplex.

Note

1000 Mbps is applicable only for M-series Sensors.

Example: set mgmtport speed 100 duplex half