---
title: "Set the management port speed and the duplex mode"
slug: "set-the-management-port-speed-and-the-duplex-mode"
tags: ["Product Usage", "IPS 10.1.10"]
updated: 2026-10-05T15:39:47Z
published: 2026-10-05T15:39:47Z
canonical: "docs.trellix.com/set-the-management-port-speed-and-the-duplex-mode"
---
> ## Documentation Index
> Fetch the complete documentation index at: https://docs.trellix.com/llms.txt
> Use this file to discover all available pages before exploring further.
# Set the management port speed and the duplex mode
## Task
Set the speed of the Management port and determine whether the port should be set to half-duplex or full-duplex. At the prompt, type:
set mgmtport speed <10 | 100 | 1000> duplex <half | full>
where<
10> indicates 10 Mbps, <
100> indicates 100 Mbps, <
1000> indicates 1000 Mbps, <
half> indicates half-duplex, and <
full > indicates full-duplex.
> [!NOTE]
> Note
>
> 1000 Mbps is applicable only for M-series Sensors.
Example:
set mgmtport speed 100 duplex half