--- title: "Set the memory usage threshold for the admin domain" slug: "set-the-memory-usage-threshold-for-the-admin-domain" tags: ["Product Usage", "IPS 10.1.10"] updated: 2026-09-06T12:32:07Z published: 2026-10-05T15:41:20Z canonical: "docs.trellix.com/set-the-memory-usage-threshold-for-the-admin-domain" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Set the memory usage threshold for the admin domain Follow this procedure for setting the memory usage threshold for all devices that belong to the root admin domain. ## Task 1. Select **Devices** → **** → **Global** → **Common Device Settings** → **Performance Monitoring** → **Thresholds**. Memory usage for admin domain ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-4B10C253-5E3E-460A-A799-7C7B850BFE62-low.png?sv=2026-02-06&spr=https&st=2026-11-22T13%3A13%3A31Z&se=2026-11-22T14%3A13%3A31Z&sr=c&sp=r&sig=tbjMdLnfqGQMGcPvmFsBWRbSsLK5Dp2RXOCGE3C7vRQ%3D) 2. Select **Memory Usage** in the drop down list against **Metric**. 3. Enter the required threshold percentage in the **Threshold [%]** column (this value should be higher than the value in the **Reset Threshold [%]** column). 4. Select the **Generate Fault?** checkbox to generate fault. Deselect the **Generate Fault?** checkbox to disable generation of fault. 5. Click **Save** to save your settings. > [!NOTE] > Note > > Click **Defaults** to set the threshold settings to the default values