--- title: "Set the port throughput usage threshold for specific devices" slug: "set-the-port-throughput-usage-threshold-for-specific-devices" tags: ["Product Usage", "IPS 10.1.10"] updated: 2026-10-05T15:41:06Z published: 2026-10-05T15:41:06Z canonical: "docs.trellix.com/set-the-port-throughput-usage-threshold-for-specific-devices" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Set the port throughput usage threshold for specific devices Port throughput usage is configurable for specific devices within a given network domain. Follow this procedure for setting the port throughput usage threshold for each device within a domain. ## Task 1. Click **Devices** → **** → **** → **Setup** → **Performance Monitoring** → **Thresholds**. Thresholds area ![port_throughput_setting_sensor_name_node](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-EAE64535-FB31-4FAF-B4E6-A685E2AF6193-low.png?sv=2026-02-06&spr=https&st=2026-11-22T13%3A20%3A44Z&se=2026-11-22T14%3A20%3A44Z&sr=c&sp=r&sig=xK7aVwWeXUOv4uynLazEbm0ZeGc0HB9dT5hOEfXAeB0%3D) 2. Select **Port Throughput Usage** in the drop down list against **Metric**. 3. Enter the required threshold percentage in the **Threshold [%]** column (this value should be higher than the value in the **Reset Threshold [%]** column). 4. Click ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-CFEBFA3B-8C1E-42A5-9456-59DD24DCD3D1-low.png?sv=2026-02-06&spr=https&st=2026-11-22T13%3A20%3A44Z&se=2026-11-22T14%3A20%3A44Z&sr=c&sp=r&sig=xK7aVwWeXUOv4uynLazEbm0ZeGc0HB9dT5hOEfXAeB0%3D) against a row to clone that row. 5. In the **Ports** column, click ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-19685C63-FE40-4AD7-AE8D-A80A12D386D3-low.png?sv=2026-02-06&spr=https&st=2026-11-22T13%3A20%3A44Z&se=2026-11-22T14%3A20%3A44Z&sr=c&sp=r&sig=xK7aVwWeXUOv4uynLazEbm0ZeGc0HB9dT5hOEfXAeB0%3D) to assign or remove the port values in the **Assign Ports** window. > [!NOTE] > Note > > If none of the ports are selected, the threshold is applied to all the ports. In such a case, the **Ports** column displays **All Ports**. 6. Select the **Generate Fault?** checkbox to generate fault. Deselect the **Generate Fault?** checkbox to disable generation of fault. 7. Click **Save** to save your settings. > [!NOTE] > Note > > Click on **Defaults** to set the threshold settings to the default values. **Under Usage** in the context of the Throughput Usage threshold is a 'falling threshold'. Alarm is generated when the Throughput % drops below a certain value. This is helpful on very busy networks, where a certain amount of traffic is always expected to be seen. This type of alarm is a good indication that there is a communication problem on the network. > [!NOTE] > Note > > **Port Throughput Usaage** metric is applicable at device level configuration but not at admin domain level.