--- title: "Set the Sensor throughput threshold for devices within the admin domain" slug: "set-the-sensor-throughput-threshold-for-devices-within-the-admin-domain-2" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:31:15Z published: 2026-11-19T12:31:15Z canonical: "docs.trellix.com/set-the-sensor-throughput-threshold-for-devices-within-the-admin-domain-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Set the Sensor throughput threshold for devices within the admin domain An alarm is generated when the throughput % drops below a certain value. This is helpful on very busy networks, where a certain amount of traffic is always expected to be seen. This type of alarm is a good indication that there is a communication problem on the network. > [!NOTE] > Note > > By default, the High setting of the Sensor Throughput Usage threshold alarm is enabled and the rest are disabled at the parent (root) domain. Follow this procedure for setting sensor throughput threshold for all devices within the admin domain. 1. From the Performance Monitoring node, select **Devices > ** > Global > Common Device Settings > Performance Monitoring > Thresholds**. 2. Select the **Medium**, **High**, or **Low** row in **Sensor Throughput Usage** and enter the required threshold percentage in the **Threshold** field. This value should be higher than the value in the **Reset Threshold** field. 3. (Optional) Select the **Generate Fault** checkbox. Faults are visible in the logs. 4. Click **Save**.