--- title: "Set the Sensor throughput threshold for devices within the admin domain" slug: "set-the-sensor-throughput-threshold-for-devices-within-the-admin-domain" tags: ["Product Usage", "IPS 10.1.10"] updated: 2026-09-06T12:32:04Z published: 2026-10-05T15:41:20Z canonical: "docs.trellix.com/set-the-sensor-throughput-threshold-for-devices-within-the-admin-domain" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Set the Sensor throughput threshold for devices within the admin domain Follow this procedure for setting Sensor throughput threshold for all devices within the admin domain. ## Task 1. Click **Devices** → **** → **Global** → **Common Device Settings** → **Performance Monitoring** → **Thresholds**. Thresholds area ![sensor_throughput_setting_root_admin_domain_node](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-0B48BCD6-B3BA-4489-9321-B73EEC50CC9E-low.png?sv=2026-02-06&spr=https&st=2026-11-22T14%3A54%3A46Z&se=2026-11-22T15%3A54%3A46Z&sr=c&sp=r&sig=BwXBs1Zdo5fWYglbw8LIXffG%2F7osVjJ%2F1vOCV3rU2fc%3D) 2. Select **Device Throughput Usage** in the drop down list against **Metric**. 3. Enter the required threshold percentage in the **Threshold [%]** column (this value should be higher than the value in the **Reset Threshold [%]** column). 4. Select **Generate Fault?** to generate fault. 5. Click **Save** to save your settings. > [!NOTE] > Note > > Click **Defaults** to set the threshold settings to the default values. "Under Usage" in the context of the throughput usage threshold is a 'falling threshold'. Alarm is generated when the throughput % drops below a certain value. This is helpful on very busy networks, where a certain amount of traffic is always expected to be seen. This type of alarm is a good indication that there is a communication problem on the network. > [!NOTE] > Note > > By default **High Usage** setting of Sensor throughput usage threshold alarm is enabled and the rest are disabled at root domain.