--- title: "Set the Sensor throughput threshold for devices within the child admin domain" slug: "set-the-sensor-throughput-threshold-for-devices-within-the-child-admin-domain" tags: ["Product Usage", "IPS 10.1.10"] updated: 2026-10-05T15:39:58Z published: 2026-10-05T15:39:58Z canonical: "docs.trellix.com/set-the-sensor-throughput-threshold-for-devices-within-the-child-admin-domain" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Set the Sensor throughput threshold for devices within the child admin domain Follow this procedure for setting the Sensor throughput threshold for devices within the child admin domain. ## Task 1. Select **Devices** → **** → **Global** → **Common Device Settings** → **Performance Monitoring** → **Thresholds**. Thresholds area ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/GUID-F01E307F-C1A0-4273-835A-C26269CECE9C-low.png?sv=2026-02-06&spr=https&st=2026-11-22T14%3A44%3A47Z&se=2026-11-22T15%3A44%3A47Z&sr=c&sp=r&sig=fFTpJ8q9hqLmAqaeDQYzICwT6TLZy5jokUDgi4pxzCM%3D) 2. Select **Device Throughput Usage** in the drop down list against **Metric**. 3. Enter the required threshold percentage in the **Threshold [%]** column (this value should be higher than the value in the **Reset Threshold [%]** column). 4. Select **Generate Fault?** to generate fault. 5. Click **Save** to save your settings. > [!NOTE] > Note > > Click **Defaults** to set the threshold settings to the default values. The threshold values can be changed only if the checkbox against **Inherit Settings?** is deselected. If this checkbox is selected, the settings from the parent admin domain are automatically inherited.