--- title: "Set thresholds" slug: "set-thresholds-2" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:31:15Z published: 2026-11-19T12:31:15Z canonical: "docs.trellix.com/set-thresholds-2" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Set thresholds Thresholds can be set to alert the user by raising a system fault when the set threshold value is crossed. For example, a system fault is raised when the Sensor CPU usage crosses an upper threshold value such as 90%. You can set thresholds at the Global level of the parent (root) admin domain, at the Global level of a child admin domain, and for an individual device. Use the Thresholds tab to change metrics threshold values and choose whether to raise a system fault when a threshold is crossed. The Manager compares each threshold with the average value over one minute. ![](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/IPS-manager-performance-monitoring-thresholds(1).png?sv=2026-02-06&spr=https&st=2026-11-20T12%3A44%3A36Z&se=2026-11-20T13%3A44%3A36Z&sr=c&sp=r&sig=m9Drt8pu4m1sLXS9ZVthr%2FmOU0YbQjZvhk1iX5oArpM%3D) Thresholds can be set for CPU usage, sensor throughput, port throughput, L2 error drop (Layer 2 here refers to too many CRC and Ethernet Packet Compliance errors) and L3/L4 error drop (Layer 3/4 here refers to too many checksum and protocol errors), and memory usage. > [!NOTE] > Note > > When a device restarts, the Manager clears the threshold faults raised for that device. If a metric is still beyond its threshold after the restart, a new fault is raised.