--- title: "Set up automatic updates for Gateway Anti-Malware Engine for a domain" slug: "set-up-automatic-updates-for-gateway-anti-malware-engine-for-a-domain-4" tags: ["Product Usage", "IPS 11.1.x"] updated: 2026-11-19T12:27:57Z published: 2026-11-19T12:27:57Z canonical: "docs.trellix.com/set-up-automatic-updates-for-gateway-anti-malware-engine-for-a-domain-4" --- > ## Documentation Index > Fetch the complete documentation index at: https://docs.trellix.com/llms.txt > Use this file to discover all available pages before exploring further. # Set up automatic updates for Gateway Anti-Malware Engine for a domain - Make sure that you have configured a DNS server for the domain to allow Sensors attached to this domain to download Gateway Anti-Malware Engine updates. If you have not done so, go to **Devices** → **** → **Global** → **Common Device Settings** → **Name Resolution** to configure a DNS server. - You must be using either an NS-series Sensor or an NTBA Appliance to use this engine. An update comprises the following components: - Gateway Anti-Malware DAT and Gateway Anti-Malware Engine - Anti-Virus DAT - Anti-Malware Engine The update can either be an incremental update or a full update. The full update is approximately 200 MB. You can set up automatic updates for both these components using these steps. If you do not want to set up automatic updates, you can use the existing process for manual updates. **Steps:** 1. Click **Devices** → **** → **Global** → **Common Device Settings** → **GAM Updating**. The **GAM Updating** page appears. 2. Select **Enable Automatic Updating?**. **Notification to configure a DNS server**![Notification to configure a DNS server](https://cdn.us.document360.io/0d453a50-e1da-4d4a-9409-fea7959614d8/Images/Documentation/uuid-ae5fa094-f22f-133d-ceb3-44932608548e(9).png?sv=2026-02-06&spr=https&st=2026-11-20T10%3A34%3A53Z&se=2026-11-20T11%3A34%3A53Z&sr=c&sp=r&sig=bCGa3oj0jMhPmKWsrfTH5VJQSutnfOXz0jinPHUO6q8%3D) If you have not configured a DNS server for this domain, you will receive a notification prompting you to do so. 3. Click the **Update Interval** drop-down. The range of the update interval is between 2 hours and 24 hours since Trellix provides updates several times in a day. 4. Click **Save** to complete the configuration. You have now set up automatic updates for all devices that run Gateway Anti-Malware Engine in the domain.